EGO PTX5100 Manual Del Usuario página 22

2. Adjust the blade to the horizontal position, ensuring that the blade assembly is in
line with the hedge trimmer shaft for easy mounting (Fig. 11).
11
Support Plate 3
Link Lever
3. Use a hex wrench (not included) to loosen the 6 screws (short screws) in the
bottom cover and remove them.
4. Continue loosening the 2 screws (long screws) to remove the support plate 1 & 2,
as well as the 2 bushings. The 2 bushings are separately located inside the two
rounded rectangle slots in the blade assembly.
5. Remove the support plate 3.
6. Carefully remove the link lever from the blade.
22
HEDGE TRIMMER ATTACHMENT — PTX5100/PTX5100-FC
Support Plate 1
Bushing
Short Screw
Bottom Cover
Long Screw
Support Plate 2
Eccentric Block
Blade Assembly