Descargar Imprimir esta página

Sauder 420650 Manual Del Usuario página 21

Publicidad

Step 17
Step
Separate the EXTENSION SLIDES (2) from the EXTENSION RAILS (1) as shown in the upper diagram below. Be
å
prepared, the parts are greasy.
Fasten two EXTENSION RAILS (1) to the SMALL ENDS (C and D). Use six BLACK 1/2" PAN HEAD SCREWS (22).
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram. Then, slide the inner
å
cartridge of the EXTENSION RAIL in to fi nd the other hole that lines up with the hole in the END. Turn a SCREW into
this hole.
NOTE: The EXTENSION SLIDES will be used later for the DRAWERS.
å
Push the black lever up and
pull the SLIDE from the RAIL.
Open end
420650
2
BLACK 1/2" PAN HEAD SCREW
The CAM SCREWS
should be here.
1
Surface with
HIDDEN CAMS
www.sauder.com
1
Open end
Use these holes.
22
(6 used in this step)
1
Surface with
HIDDEN CAMS
C
D
Open end
Page 21

Publicidad

loading