Other Settings; Energy-Saving Mode; Auto-Off Function; Brewing Temperature - melitta CAFFEO SOLO Manual De Instrucciones

When illuminates, proceed as follows:
• Empty and reinsert the drip tray.
• Rinse the water reservoir thoroughly.
• Fill the water reservoir with tap water up
to the max. mark.
• Insert the water reservoir.
• Press the
descaling programme (takes about 5
minutes).
When illuminates, proceed as follows:
• Empty the drip tray and reinsert it.
When is illuminated, the descaling
programme is finished.
• Insert the water filter if necessary
(„Water hardness and filter", Seite 18).

Other settings

Energy-saving mode

After the last action, the appliance
switches automatically (depending on the
settings) to the energy-saving mode. The
appliance is set to 5 minutes
factory.
• Switch on the appliance.
• Press the
simultaneously until
• Press the
illuminates.
• Press the
four times is set. The time is displayed
by the beans on display 9 (from
minutes to flashing
• Press the
setting.
22
button to continue with the
in the
and buttons
flashes.
button twice.
button until one of the
= off).
button to confirm the

Auto-OFF function

The appliance switches off automatically
after the last action (depending on the
setting). From the factory, the appliance is
set at 30 minutes
• Switch on the appliance.
• Press the
simultaneously until
• Press the
illuminates.
• Press the
four switch-off times is set. The time
is displayed by the beans on display
9 (from
• Press the
setting.

Brewing temperature

From the factory, the brewing temperature
is set to Level 2 (medium
• Switch on the appliance.
• Press the
simultaneously until
• Press the
illuminates.
• Press the
three brewing temperatures is set. The
temperature is shown by the beans on
display 9 (from
high.).
= 5
• Press the
setting.
.
and buttons
flashes.
button three times.
button until one of the
= 30 minutes to flashing
= 8 hours).
button to confirm the
and buttons
flashes.
button four times.
button, until one of the
= low to
button to confirm the
).
=