Dash Disassembly - Metra 99-6538B Instrucciones De Instalación

1. Unclip the radio trim panel, then unplug
and remove the panel. (Figure A)
2. Remove the (4) Phillips screws securing
the radio, then unplug and remove
the radio.
3. Remove the (1) Phillips screw securing
the metal radio support bracket, and
then remove the bracket from the sub
dash. (Figure B)
Note: A cutting tool is desired but you
can rock the metal bracket back and
forth to break it free from the weld at
the top. (Figure C)
2

DASH DISASSEMBLY

(Figure A)
(Figure B)
(Figure C)
4. Cut and remove the plastic screw tab
that secured the bracket in place.
(Figure D)
5. Unscrew the module in the sub-dash,
and then slide it down a bit for the radio
chassis to clear. (Figure E)
Continue to Kit Preparation
Remove shaded area
(Figure D)
(Figure E)
|
1.800.221.0932 MetraOnline.com