VLUV QoQa Manual Del Usuario página 20

20
ENGLISH
3.7 Opening the VLUV
To remove the closing valve, do NOT use sharp objects. A screwdriver or a coffee spoon are particularly suitable.
Place this under the lip of the closing valve and lever it out.
WARNING: The closing valve can, due to the air pressure, suddenly be pressed out of the valve
hole. Secure this by putting a finger on it.
4. SAFETY INSTRUCTIONS DURING USE
If possible place the VLUV on a non-slip surface. If you have a slippier surface such as stone, tiles, parquet or
laminate always use a non-slip underlayer.
• Sharp-edged surfaces such as slate, unpolished stone or unground floorboards are to be avoided.
• If possible do not expose the VLUV to direct sunlight.
• The field of use is indoors. It is not intended for use outdoors.
• In the event of any kind of damage, do not use the ball anymore and get in touch with our service
department under info@vluv.de.
DE
• VLUV has clear upper and lower sides. When in use the grip must point upwards, andthe ball must
EN
stand on the lower floor ring. When sitting down or standing up always proceed carefully and observe a
FR
stable foot position.
IT
ES
NL