Publicidad
Idiomas disponibles
Idiomas disponibles
4. Hanger Locations: Remove four hangers (1) from mid-section of the rear exhaust and remove rear section.
Note: Take caution to support the muffler when removing the hangers to avoid possible damage to the fascia.
Performance Exhaust Install
5. Y-Pipe Installation: Install Y-pipe (2) onto stock section. Loosely install clamp (3) and seat hanger into rubber grommet (1).
Do not tighten clamp.
Note: It is recommended that two people perform this step.
6. Mid-Pipe Installation: Install mid-pipe (2) onto Y-pipe (4) with clamp (3). Seat hanger into grommet (1). Do not tighten clamp.
Chevrolet Performance Exhaust –
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
Gen 6 Camaro 4 Cylinder (LTG)
84578425
IR 22MY18
PART NO.
DATE
22MY18
Initial Release - Benjamin Kaminsky
4
SHEET
REVISION
21
OF
AUTH
N/A
Publicidad
