I-Tech PHYSIO Manual De Instrucciones página 80

Guidance and manufacturer's declaration – ELECTROMAGNETIC EMISSIONS –
CISPR 11
Harmonics emissions
IEC 61000-3-2
Voltage
fluctuation/flicker
emissions
IEC 61000-3-3
Guidance and manufacturer's declaration – ELECTROMAGNETIC IMMUNITY –
I-TECH PHYSIOis intended for use in the electromagnetic environment specified
below. The customer or the user of the device should assure that it is used in such
an environment.
Immunity test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Impluses
IEC 61000-4-5
Voltage dips, short
interruptions and
voltage variations
on power supplì
input lines
IACER Srl
FOR ALL EQUIPMENT AND SYSTEMS
Class A
Compliant
FOR ALL EQUIPMENT AND SYSTEMS
Test level
Compliance level
IEC 60601
±8kV in contact ±8kV in contact
±2Kv, ±4kV, ±2Kv, ±4kV,
±8kV; +15kV on ±8kV; +15kV on
air air
±2kV ±2kV
for power for power
supplies lines supplies lines
±1kV ±1kV
for input/output for input/output
lines lines
±0.5kV, ±1kV ±0.5kV, ±1kV
Line(s) to line(s) Line(s) to line(s)
±0.5kV, ±1kV, ±0.5kV, ±1kV,
±2kV ±2kV
Line(s) to earth Line(s) to earth
0% U a 0°, 45°, % U
T
90°, 135°, 180°, 90°, 135°, 180°,
225°, 270° and 225°, 270° and
315° for 0,5 315°
cycles cycles
80
I-TECH PHYSIO is suitable for
domestic establishment and in
establishment directly connected to
the public low-voltage power supply
network that supplies buildings used
for domestic purposes.
Electromagnetic
environment - guide
Floors
wood, concrete or
ceramic tile. If floors
are
synthetic
the relative humidity
should be at least
30%.
Mains power quality
should be that of a
typical commercial or
hospital environment.
Mains power quality
should be that of a
typical commercial or
hospital environment.
a 0°, 45°, Main power quality
T
should be that of a
typical commercial or
for 0,5 hospital environment.
If the user of I-TECH
should be
covered with
material,
MNPG158-07