Widex COM-DEX Instrucciones De Uso página 76

Pairing your device
Pairing your device to your COM-DEX
To pair your device to your COM-DEX for the first time, follow these steps:
1. Make sure that your COM-DEX is in pairing mode.
2. Turn on your device. The first time you do this, the device will be set
in pairing mode and it will automatically connect to your COM-DEX.
This can take a few minutes.
NOTE
Once you have paired your device to your COM-DEX, it will remain so and
will connect automatically if your COM-DEX is on.
Resetting the COM-DEX Remote Mic for a new pairing:
1. Turn on your device.
2. Reset your device to factory settings by pushing both buttons for 5
seconds. The device will be set to pairing mode.
3. Follow the pairing procedure described above.
Using the device - see illustration 4
Remove the protective film before using your device.
Place the device on the shirt collar of the person you'd like to hear.
Turn on the device. The Remote Mic starts streaming automatically.
76