NOTE
While streaming, your hearing aid microphones will be turned off. Once the
Remote Mic stops streaming, the hearing aid microphones will be turned on
again after a few seconds. If you want to turn on your hearing aid micro-
phones while streaming, simply press the Room Off button on your COM-DEX.
To start and stop streaming, simply push the streaming button on your
Remote Mic. While streaming, the LED will show a green light.
NOTE
If you want to operate your device via the COM-DEX app, you'll need to up-
date the app.
Sound adjustment
The sound that is streamed from the device to COM-DEX can be adjusted
in 3 levels. Simply push the power button on the side of the device and
the sound level will be altered in a three step circle (highest level – lowest
level – back to normal level).
Visual indicators - see illustration 5
Your device has two LEDs that flash with different colors. The purpose of
these colors is to inform you of which mode your device is in at any given
time.
● Constant red light on the bottom LED: The device is charging.
● Constant green light on the bottom LED: The device is fully charged.
● Flashing blue-red-blue-red light on both LEDS: The device is ready to
be paired.
77