Safety Instructions - ESYLUX PD-C360i/24 DUODIMplus-FM Manual Del Usuario

GB INSTaLLaTION aND OPERaTING INSTRUcTIONS
Congratulations on your purchase of this high-quality ESYLUX product. To ensure
proper operation, please read these user instructions carefully and keep them for
future reference.
1 • SAFETY INSTRUCTIONS
CAUTION: work on the 230 V power system must be carried out by
authorised personnel only with due regard to the applicable installation
regulations. Switch off the power supply before installing the system.
μ
= Contact gap < 1.2 mm
Use this product only as intended (as described in the user instructions).
Changes or modifications to the product or painting it will result in loss
of warranty. You should check the device for damage immediately
after unpacking it. If there is any damage, you should not install the
device under any circumstances.
If you suspect that safe operation of the device cannot be guaranteed,
you should turn the device off immediately and make sure that it cannot
be operated unintentionally.
NOTE: this device must not be disposed of as unsorted household waste.
Used devices must be disposed of correctly. Contact your local town
council for more information.
2 • DESCRIPTION
ESYLUX PD-C360i /24 DUODIMplus series presence detector with
360° field of detection and 24 m range. ESYLUX presence detectors
are passive infrared detectors which react to moving heat sources
(e.g. people) (Fig. 1 (1) working area (2) head-on to detector (3) diagonally to
detector). If the presence detector senses a change in thermal radiation
inside its field of detection, depending on the set light value, it will
switch on the light channel for a preset length of time. If there is a
change in the natural light value, the artificial light can be adjusted
accordingly (constant light control) via the dimming interface. An
additional HVAC switch contact can be used to control another light
source/panel lighting or to operate the heating, air conditioning and
ventilation systems depending on presence, and regardless of the light
value.
The ESYLUX PD-C360i/24 DUODIMplus series presence detector is
designed exclusively for ceiling mounting. Depending on the model,
surface mounting (SM) or recessed mounting (FM) is possible.
The ESYLUX presence detector features 2 factory settings and operates
according to preset values. The values can be individually modified
using the ESYLUX Mobil-PDi/plus remote control (available as an
option).
GB
13