Mounting The Flash Tube; Installing The Standard Reflector / Accessories; Connecting To The Power Porta / Rechargeable Battery; Connecting The Flash To A Camera - Walimex Pro Light Shooter 360 TTL Manual De Instrucciones

5. Installation before use

5.1 Mounting the flash tube

1. Remove the reflector or other accessories from the head section of the
flash.
2. Align the red dot on the underside of the flash tube with the red dot on the
flash tube socket. Push the flash tube into the socket, until it fits tightly.
42

5.2 Installing the standard reflector / accessories

1. Turn the fastening screw counter-clockwise, until it is loose.
2. Insert the reflector into the accessories connection.
3. Turn the fastening screw clockwise to fasten the reflector.

5.3 Connecting to the Power Porta / rechargeable battery

1. Before connecting the Power Porta make sure that the power supply unit is
switched off.
2. Plug one end of the electric power supply cable into the power supply
socket on the flash and the other end into the socket of the Power Porta.
3. Switch on the power supply unit. The flash should normally be fully charged
and ready for use.

5.4 Connecting the flash to a camera

1. Loosen the locking ring 2. Slip the mounting foot
on the mounting foot. of the flash unit into the
camera hatshoe.
3. Secure the flash unit by
rotation the locking ring
the direction of the row
43