Number of flashes, after which the overheating protection in synchronous high-
speed triggering is activated:
Flash output power
1/1
1/2 (+0.3, +0.7)
1/4 (+0.3, +0.7)
1/8 (+0.3, +0.7)
1/16 (+0.3, +0.7)
1/32 (+0.3, +0.7)
1/64 (+0.3, +0.7)
1/128 (+0.3, +0.7)
The overheat protection function is also activated if you trigger the flash 30
times at full output without a break. Your Light Shooter will require a break of
75 minutes.
8. Maintaining the device
Do not bring the device into contact with moisture or water.
NOTE
Do not bring the device into contact with moisture or water.
Cleaning
Device
Cleaning
Housing
Remove light and intractable dirt with a dry
micro-fibre cloth
62
Flash output power (approx.)
75
100
150
200
300
500
1000
1000
9. Accessories and options
You find optimal accessories for your device in our webshop.
10. Waste disposal and protection of the environment
Dispose of the device at a local waste disposal site or at an electrical device
shop. This service is free of charge.
11. Reference to the Declaration of Conformity
"WALSER GmbH & Co. KG. hereby declares that the remote control and
integrated radio receiver are compliant with the general requirements and all
other applicable regulations of the directive 2014/53/EU". The Declaration of
Conformity is available from the following address: info@walimexpro.de.
12. Technical specifications
Flash factor
80 (1m ISO 100 with standard reflector)
Output
Colour temperature
Rotation angle vertical
Rotation angle horizontal
Voltage supply
Max. number of flashes
Charging time
Total weight
Dimensions
Storage conditions
360W/s
5600K +/-200K
-15 – 90 Grad
0-270 Grad
walimex pro Power Porta/
walimex pro Power Porta
approx. 450 at full power with
walimex pro Power Porta
ca. 0,05-4,5s
approx. 800 g without flash tube
and standard reflector
approx. 220x95x75mm
(without flash tube and reflector)
Dry and dust free in cardboard box at
-20 °C to +50 °C
63