Solve Problems; Maintenance Of Powerblock; Continuous Inspection And Maintenance Of Powerblock; Cleaning The Powerblock - Walimex Pro Light Shooter 360 TTL Manual De Instrucciones

8. Solve problems

Problem Possible Cause
Powerblock is switched Powerblock is not or
on, but shows no not sufficiently charged
function
Powerblock is switched No batteries in your
on, but flash is not flash device
triggered
Powerblock is switched Powerblock is
on, but shows no defective
function
Battery level LED 1
Weak Flicker
Low On
Middle On
To be full On
Full On
30
Solution
Charge Powerblock
Insert batteries (see
instruction manual of
your flash device)
Contact customer
service
LED 2 LED 3 LED 4
Off Off Off
Off Off Off
On Off Off
On On Off
On On On
9. Maintenance of the Powerblock
9.1. Continuous inspection and maintenance of the Powerblock
What you should do
Inspect all cables, sockets and plugs for damage.
If damaged:
WARNING
Danger of electric shock and danger of fire due to short circuit.
Have the Powerblock repaired by an electrician immediately

9.2. Cleaning the Powerblock

WARNING
Always disconnect Powerblock from power supply when cleaning it.
Device Cleaning
Casing Remove light and persistent stains with
microfiber cloth

10. Accessories and options

You can find extensive accessories for your walimex pro Powerblock in our
web shop.

11. Disposal and environmental protection

Please dispose of your device at your local disposal area at no charge.
Before each use
X
31