Checks To Carry Out Before Starting Work; Operating The Machine; Raw Material Conditions; Preparation Of The Raw Material - Master Trimmers MT Standard 50 Manual De Uso Y Mantenimiento

Place the collection bag, as shown in the following image, resting
3
the ring on the hooks of the drum, located in the lower part of the
body (A).

Checks to carry out before starting work

Make sure the lid pull latches are properly closed.
1

Operating the machine

Master Products provides a cut-off mechanism that must not be altered by the user. If any task is carried out on
the machine, be it, for example, maintenance, regulation, adjustment, etc., it is essential to comply with the safety
regulations indicated in the 'safety for the operator' section.

Raw material conditions

The MT Standard 50 and 75 machines have been designed to work with all types of fresh herbaceous and semi-
woody plants. All materials not of this nature must not be processed.

Preparation of the raw material

To be able to work with the MT Standard 50/75 it is important to leave a part of the lower branch to be able to grip it
with the gauntlet and work comfortably and safely.
24
Finally, connect one end of the power cable (I) supplied to the
4
connector provided on the body of the machine, and the other
end to the power supply.
IMPORTANT: Make sure that the electrical wiring is
perfectly positioned, without forming loops that could
cause tripping.
www.masterproducts.es