Reset To Factory Settings - Beem Classico Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

5. The device starts to prepare espresso or make milk froth.

6. Only let go of the button once the quantity of milk or espresso that you want has

passed through. You will hear three beeps. This quantity is now saved under the

corresponding function.

Cappuccino and Latte Macchiato

This process must be carried out twice for latte macchiato and cappuccino: Once

for the quantity of espresso and once for the quantity of milk:

1. On the ﬁ rst operation, set the quantity of milk you want in the manner described in

the previous section. Make sure that the milk nozzle (8) is folded out and there is a

cup below the milk nozzle.

2. Start a second operation by pressing the appropriate button again. A beep sounds.

3. Wait until the quantity of milk has passed through.

4. As soon as the device starts to make espresso, press the appropriate button again

and hold it down. Another beep sounds.

5. Only let go of the button again once the quantity of espresso that you want has

passed through. You will hear three beeps.

Now both the quantity of milk and the quantity of espresso are saved under the

appropriate function.

Setting the Milk Froth Quantity

On the milk tank cover (6) there is a dial (5) which can be used to set whether more milk

froth or more hot milk should be added to the speciality coffee.

For more milk froth: Turn the dial to the top right.

For more hot milk: Turn the dial to the bottom left.