Seca 376 Manual De Instrucciones Y Garantía página 53

5. Select the menu item "lrn" (learn) in the "rf" sub-
menu.
6. Confirm the selection.
The wireless group currently selected (here:
wireless group 0 "ID 0") is displayed.
If the wireless group "0" already exists and you wish
to set up another wireless group with this device,
use the arrow key to select another ID (here: wire-
less group 1 "ID 1").
7. Confirm your selection for the wireless group.
The device will suggest a channel number for
channel 1 (here C1 "0").
You can either accept the channel number sug-
gested or select another channel number using the
arrow key.
8. Confirm your selection for channel 1.
The device will suggest a channel number for chan-
nel 2 (here C2 "30").
You can either accept the channel number sug-
gested or select another channel number using the
arrow key.
NOTE:
Two-digit channel numbers are displayed with-
out a space. The display "C230" means: chan-
nel "2", channel number "30".
9. Confirm your selection for channel 2.
The device will suggest a channel number for
channel 3 (here C3 "60").
You can either accept the channel number sug-
gested or select another channel number using the
arrow key.
10. Confirm your selection for channel 3.
StOp
The message
The device is waiting for signals from other equip-
ment devices with radio transmission capability
within its range.
NOTE:
With certain devices a special switch-on proce-
dure has to be followed if they are to be inte-
grated in a wireless group. Consult the user
manual for each device.
appears in the display.
seca 360° wireless Network • 53
English