Using The Brass Filter Holder; Tips For Choosing Coffee - Saeco VIA VENETO C DLX ALU BLK COM004CL Instrucciones De Uso

COFFEE BREWING
• As the machine is fi tted with the special "Crema" fi lter hold-
er (18), there is no need to change the fi lter when making
one or two coff ees.
• (Fig.29) - By means of the fi lter holder, obtain an adequate
quantity of ground coff ee (section 5.1) to prepare one or
two coff ees.
• Clean the fi lter holder rim from any coff ee residues.
• (Fig.30) - Insert the "Crema" fi lter holder (18) into the brew
unit (7) from the bottom and turn it from left to right until it
perfectly locks into place, as previously described.
• (Fig.31) - Take 1 or 2 preheated cups and place them under
the fi lter holder. Make sure that they are correctly placed
under the coff ee brewing nozzles.
• Press the brew button. Wait until the cups are adequately
fi lled.
• Press the brew button again to stop coff ee brewing.
• (Fig.32) - Wait a few seconds after brewing, then remove
the fi lter holder and empty the remaining coff ee grounds
out.
Cleaning note: Keep the fi lter of the "Crema" fi l-
ter holder clean by removing it from its seat and
washing it with drinking water.

6.2 Using the Brass Filter Holder

• Insert the fi lter (22 or 21, for 1 or 2 cups according to the
number of coff ees you wish to prepare) into the brass fi lter
holder (23).
• (Fig.30) - Insert the brass fi lter holder into the brew unit (7)
from the bottom and turn it from left to right until it locks
into place.
• (Fig.31) - Place a cup under the fi lter holder.
• Preheat the fi lter holder and the cup by pressing the cof-
fee button (4). Water will fl ow out of the fi lter holder (this
operation is only necessary for the fi rst coff ee).
• When the cup is adequately fi lled, press the brew button (4)
again.
• (Fig.32) - Remove the fi lter holder from the machine by
turning it from right to left.
• (Fig.29) - By means of the fi lter holder, obtain one or two
doses of ground coff ee (section 5.1) according to the previ-
ously mounted fi lter.
• Tamp the coff ee using the lower part of the measuring
scoop (20) and clean the fi lter holder rim from any coff ee
residues.
• (Fig.30) - Insert the brass fi lter holder (23) into the brew
unit (7) from the bottom and turn it from left to right until it
perfectly locks into place.
• (Fig.31) - Take 1 or 2 preheated cups and place them under
the fi lter holder. Make sure that they are correctly placed
under the coff ee brewing nozzles.
• Press the brew button. Wait until the cups are adequately
fi lled.
• Press the brew button again to stop coff ee brewing.
• (Fig.32) - At the end of the operation remove the fi lter
holder and empty the remaining coff ee grounds out.
Cleaning note: Keep the fi lter of the fi lter holder
clean by removing it from its seat and washing it
with drinking water.

7 TIPS FOR CHOOSING COFFEE

As a general rule, any type of coff ee available on the market
can be used.
However, coff ee is a natural product and its fl avour changes
according to its origin and blend; it is therefore a good idea to
try diff erent types of coff ee in order to fi nd the most suited to
your personal taste.
For optimal results, we recommend using espresso machine
blends.
As a rule, coff ee should always come out of the fi lter holder
regularly and without dripping.
The speed of coff ee brewing can be modifi ed by slightly chang-
ing the amount of coff ee in the fi lter, the degree of grind and/
or how the coff ee is tamped in the fi lter.
BEFORE PERFORMING ANY OPERATIONS RELATED
TO HOT WATER/STEAM DISPENSING, MAKE SURE
THAT THE STEAM WAND (PANNARELLO) IS DIRECTED OVER
THE WATER RECOVERY TRAY.
23