OHAUS MB23 Manual De Instrucciones página 12

Analizador de humedad
Ocultar thumbs Ver también para MB23:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EN-10
RS:2400,7,N,2,X
RS232 Output
^^^^^^^^^^^^^^^^^^^^^^^^
MOISTURE DETERMINATION
OHAUS MB2x SN #########
Switchoff Mode
Drying Temp
Result Units
00:10
0.0%MC
00:20
0.0%MC
Elapsed Time
Initial Weight
Final Weigh
Final Result
^^^^^^^^^^^^^^^^^^^^^^^^
Compliance
Compliance to the following standards is indicated by the corresponding mark on the product.
Marking
Standard
This product conforms to the EMC directive 2004/108/EC and the Low Voltage Directive 2006/95/EC.
The complete Declaration of Conformity is available from Ohaus Corporation
AS/NZS4251.1 Emission, AS/NZS4252.1
CAN/CSA-C22.2 No. 61010-1-04; UL Std. No. 61010A-1
Disposal
In conformance with the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE)
this device may not be disposed of in domestic waste. This also applies to countries outside the EU, per their
specific requirements.
Please dispose of this product in accordance with local regulations at the collecting point specified for electrical
and electronic equipment.
If you have any questions, please contact the responsible authority or the distributor from which you purchased
this device.
Should this device be passed on to other parties (for private or professional use), the content of this regulation
must also be related.
Disposal instructions in Europe are available online at www.ohaus.com. Choose your, country then search for
"WEEE".
Thank you for your contribution to environmental protection.
Change RS232 setting (The current RS232 setting can be displayed on the LCD by pressing
Print for 2 seconds while in standby mode.)
Baud:1200,2400,4800,9600,19200
Data Bits: 7 or 8
Parity: N = none, O = odd, E = even
Stop Bits: 1 or 2
Handshake: X = xon/xoff (software), R = RTS-CTS (hardware), N = none
The Analyzer will return "ES" for invalid commands.
All communication uses standard ASCII format.
Sent commands must terminate with a Line Feed or Carriage Return Line Feed (CRLF).
Header on
Header on
TIMED 10:00
Header on
100C
Header on
%Moisture
Header on
If Print pressed or print interval set.
If Print pressed or print interval set.
00:02:21
Printed at successful end of test.
8.560 g
Printed at successful end of test.
8.555 g
Printed at successful end of test.
0.0%MC
Printed at successful end of test.
MB23 / MB25

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mb25

Tabla de contenido