geberit Selva Manual De Instrucciones página 17

2
Demount the cover for the spray
head.
3
Demount the nozzle.
4
Clean the nozzle and rinse with
water, or replace the nozzle (art. no.
243.333.00.1).
5
Mount the nozzle.
6
Mount the cover for the spray head.
7
Mount the urinal flush control. →
See illustration sequence
page 276.
Result
✓ The urinal is ready for operation.
Replacing the urinal trap
For hygiene reasons, replace the urinal trap
at least once a year.
Prerequisite
– Cleaning mode is activated.
– Refer to illustration sequence
page 278 while carrying out the
instructions.
1
Demount the cover for the urinal
trap.
2
Demount the urinal trap.
3
Replace the urinal trap (art. no.
243.312.00.1) and the cover for the
urinal trap (art. no. 243.314.00.1).
4
Mount the urinal trap.
5
Mount the cover for the urinal trap.
18014401623384843-1 © 09-2018
966.934.00.0 (02)
Cleaning or replacing the
basket filter
• Clean the basket filter in the solenoid
valve at least every 2 years or if the flush
volume decreases.
• Descale the basket filter with a commer-
cially available descaling agent if
necessary.
• Replace the basket filter if it can no
longer be completely cleaned and
descaled.
Prerequisite
– Refer to illustration sequence
page 279 while carrying out the
3 , instructions.
1
2
3
5 ,
4
5
6
7
8
9
Demount the urinal flush control. →
See illustration sequence
page 275.
Disconnect the cable for the battery
or rechargeable battery
compartment. → See illustration
sequence 9 , page 282.
Demount the locking bracket.
Disconnect the solenoid valve and
demount the coupling.
Remove the basket filter.
Clean, descale or replace the basket
filter.
Install the basket filter.
Mount the coupling and snap in the
solenoid valve.
Mount the locking bracket.
EN
6 ,
2 ,
17