Tabla de contenido
Publicidad
Büchi Labortechnik AG
Manual de instrucciones Rotavapor® R-250 Pro
Flange adapter for flasks , SJ29.2/32
To use a 1, 2 or 3 L evaporating flask with SJ29.2/32
Vacuum pump Sogevac SV40
Rotary vane pump with a flow rate of 40 m³/h and an ulti-
mate vacuum of < 2 mbar.
Foam detector assembly
Internal sensor detects rising foam and triggers a short ae-
ration pulse, eliminating foam.
Only in combination with a descending glass assembly.
AutoDest sensor cpl.
For automatic distillation. Measures temperature of cooling
media.
Vacuum is adjusted according to cooling capacity of conden-
ser.
Vacuum valve, 4 mm, 24 V, connection piece
12.5 mm
Electrical valve for vacuum regulation when operated with a
non-BUCHI vacuum pump.
Vapor duct with integrated sinter plate
The integrated sinter plate P3 protects the condenser as-
sembly against powder and dust during the drying process.
Cooling water flow sensor
Checks the flow of coolant, stopping operation when flow of
coolant is insufficient or interrupted.
Cooling water temperature sensor
Needed to display the coolant temperature for optimal dis-
tillation settings.
Cooling water valve
Eliminates unnecessary water waste by stopping cooling
water flow when not in use.
Level sensor for receiving flask
For defined concentration of product or to prevent an over-
flow of the secondary condenser if combined with a Va-
cuum Pump V-600 with secondary condenser
Stopper, PE, 120 mm
To close the evaporating flask
Communication cable. BUCHI COM, 15 m, 6p
Enables connection between Rotavapor®, Interface, Va-
cuum Pump, Recirculating Chiller, VacuBox and LegacyBox.
N.º de pedido
11058738
034063
11056083
11064486
11055928
041100
11055971
11055988
041191
11056192
11057349
11064090
Anexo | 12
Figura
77/80
Publicidad
Tabla de contenido
