Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING THE DATE AND TIME ON THE CAMERA MODULE (WINDOWS)
This section covers the steps you need to take to ensure your camera module has the correct date and time for your
time zone; however it is not required and the video camera floodlight will still function and record videos if this section
is skipped.
You can use a Microsoft or Apple computer. If you are using a computer with Mac OS, please refer to the instructions
for Apple computers, beginning on page 7.
1. To set the time and date, the camera module must be removed from the floodlight and connected to a Windows
compatible computer via the USB port.
2. Plug the camera module into a USB port on your computer. Your computer should show you two new drives.
Both should be listed in the "Devices with Removable Storage" section in your Computer folder view. One is the
camera, one is the storage card.
NOTE: THE DRIVE LETTERS MAY DIFFER ON YOUR COMPUTER. IDENTIFY THE DRIVE LABELED "REMOVABLE DISK"
AND THE DRIVE LABELED "SYNC CAMERA CLOCK".
Click "Open folder to view files" on the "Sync Camera Clock" Autoplay box. The camera does not automatically sync
when you plug the camera into a USB port. You must run the program to sync the camera.
3. You will see two folders: One for Windows and one for MacOS. Open the Windows folder and click the program
called, "Sync Camera Clock".
4. A pop-up will confirm the camera is now synced to the PC clock.
NOTE: YOU WILL NEED TO SYNC THE CAMERA MODULE AGAIN WHEN SEASONAL TIME CHANGES OCCUR.
THE CAMERA MODULE WILL NOT AUTOMATICALLY ADJUST THE TIME. SYNCING THE CAMERA MODULE TO A
COMPUTER ENSURES YOU HAVE THE PROPER TIME.
NOTE: IF THE VIDEO CAMERA FLOODLIGHT IS OFF OR THE BATTERY HAS NO POWER FOR MORE THAN FOUR (4)
DAYS, THE DATE AND TIME MAY LOSE ACCURACY. REPEAT THE SETTING THE DATE AND TIME SECTION ON PAGE
4 TO SYN THE CAMERA AGAIN. BE SURE THE BATTERY PACK IN THE VIDEO CAMERA FLOODLIGHT IS FULLY
CHARGED AS WELL.
5
Publicidad
Tabla de contenido
