MAXSA Innovations 44642-CAM-BK-16-12 Instrucciones De Montaje Y Funcionamiento página 7

SAVING THE VIDEOS (WINDOWS)
1. Open the folder on your hard drive where you want to store the videos.
2. Go back to the folder view for the Micro-SD card storage and highlight all of the files you wish to save.
3. Click and drag the group of files to the folder on your hard drive where you want to store the files.
4. Once the files have transferred, you can delete the files on the Micro-SD card storage.
REMOVING THE CAMERA MODULE FROM THE COMPUTER (WINDOWS)
1. Look at the system tray icons (shown in the red square in image 1 below) for the icon of a USB plug with a
green check mark. Hover the mouse over the icon and a box should appear that says Safely Remove
Hardware. You may have to hit an upwards pointing arrow in the system tray to see the icon. This arrow is
circled in red.
2. Right click on the icon of a USB plug with a green check mark and choose Eject USB 2.0 Device.
3. Remove the camera module from the computer and return to the floodlight, but do not reconnect the camera
to the motion sensor yet. You may want to change the TIME and LUX settings, which is covered on page 10.
NOTE: YOU WILL NEED TO SYNC THE CAMERA MODULE AGAIN WHEN SEASONAL TIME CHANGES OCCUR. THE
CAMERA MODULE WILL NOT AUTOMATICALLY ADJUST THE TIME. SYNCING THE CAMERA MODULE TO A WINDOWS
COMPUTER ENSURES YOU HAVE THE PROPER TIME.
NOTE: IF MORE THAN FOUR (4) DAYS PASS WITHOUT CHARGING THE VIDEO CAMERA FLOODLIGHT, THE DATE
AND TIME ON THE CAMERA WILL LOSE ACCURACY. REPEAT THE HOW TO INSTALL YOUR SOLAR SECURITY VIDEO
CAMERA AND FLOODLIGHT SECTION ON PAGE 3 TO FULLY CHARGE THE BATTERY PACK AND SYNC THE CAMERA
AGAIN.
7