SonoSite X-Sorte Manual Del Usuario página 9

Figure 7 The engine inserted in the stand
5 Reconnect any devices you removed from the
engine.
To remove the engine from the stand
Caution: Disconnect any devices attached
to the ultrasound engine (such
as the Triple Transducer
Connect, USB memory sticks,
transducers, power cables, or
ECG cables) before removing it
from the stand.
1 Locate the two gray latch levers under the left
and right sides of the stand head.
Figure 8 Two gray latch levers under the left and right
sides of the stand
2 Simultaneously pull each latch outward, away
from the engine and towards the stand's outer
edges. The engine ejects from the stand.
Figure 9 Lifting the engine out of the stand
3 Lift the engine from the back edge and lift
forward and up away from the top of the stand.
7