Cable Connection Test - Dentsply Maillefer propex pixi Instrucciones De Uso

2. Remove the battery compartment cover and the old battery.
3. Insert a new battery into the battery compartment according to polarity marking.
4. Close the battery compartment, secure the cover with the screw and adjust the
silicon screw cover.
The new battery should be charged for 24 hours prior to the first use of the device.

6.5 Cable connection test

A connection test feature is included in propex
order to check the cables:
1. Connect the measurement cable and turn on the
device.
2. Connect the metal part of the connection hook to
the lip clip. Make sure that the accessories are
cleaned properly before the test.
3. "Connection test" icon
the status bar - see Pic. 6.
4. If no icon appears, the connection hook or the measurement cable should be
replaced.
Pic. 5
pixi
™
•
should appear on
13
in
Pic. 6