Functional Description; Installing The Alignment Jig En - Abicor Binzel WH Instructivo De Servicio

Alignment jig
4.1 Transport
The components are carefully checked and packaged, however damage may occur during shipping.
Checking procedure
on receipt of goods
In case of damage
In case of complaints
Packaging for return
shipment
Tab. 4

5 Functional Description

The torch neck to be tested is clamped into the clamping body according to the bending angle. After a
collision, the torch neck can be realigned slightly by means of the adjusting lever.
Danger of crushing
Parts of the body can be crushed between the torch neck and the guide device when aligning the torch
neck during normal operation.
• Keep out of the danger zone.
5.1 Installing the alignment jig
NOTE
To allow the alignment jig to be screwed on free from distortion surface, the installation surface must be
flat.
Make sure that the shipment is complete by referring to the delivery note!
Check the package and components for damage (visual inspection)!
If the goods have been damaged during transport, contact the last carrier
immediately! Keep the packaging for possible checks by the carrier.
Use the original packaging and the original packaging material. If you have
questions concerning the packaging and safety during shipment, please
consult your supplier.
Transport
WARNING
5 Functional Description
EN - 5