Range Of Application; Typical Applications; Scope Of Supply - SCANMASKIN SCAN COMBIFLEX 450 Standard Manual Del Usuario

SCAN COMBIFLEX 450/450NS
1.4

Range of application

SC 450 is exclusively designed to process horizontal surfaces. SC 450 must not be used
for other purposes than stated in this user guide. The manufacturer will not be lia-
ble for damage or injury resulting from incorrect usage of SC 450. Failure to follow
the directions in this user guide will void the warranty.

Typical applications

• Removal of old coatings, carpets, putty from hard surfaces
• Removal of undulated concrete surfaces
• Preparation of the surface for coatings
• Polishing of the surface
• Removal of coating defects
• Removal of glue residues
SC 450 is recommended from small to medium sized work sites.
1.5

Scope of supply

The following parts are included with the standard SC 450 grinding machine:
• User Guide
• 5 mm hexagon socket key
Machines sold outside of Europe will be either equipped with a local standard connector for
the power inlet or the mating connector will be included and fitted at the main power inlet.
Read "2.6 Electrical safety" before connecting any included connectors.
www.scanmaskin.com
ENGLISH
45