Blackstone GBK-700 1L Manual Del Usuario página 47

2.5.CARE AND USE OF THIS MACHINE
The chipper is only designed to
shred pieces of wood with a
maximum diameter of 6 cm. It is
prohibited to shred any other material
(for example metal, stones, plastics
and any other material). If you want to
shred roots, remove the sand, mud or
other residues before shredding. Any
other use of
the shredder not described here, annuls
the warranty responsibility of the
manufacturer.
Check that all the safety devices are
installed and in good condition.
Remember that the machine operator is
responsible for the dangers and
accidents caused to other people or
things. The manufacturer will not be in
any way liable for damages caused by
improper or incorrect use of this
machine.
The cutting tool is very sharp. Not
following the instructions may
cause severe damage.
Keep this machine maintained and in proper
condition.
Check that the moving parts are not
misaligned or locked, that there are
no broken parts or other conditions
that may affect the operation of this
machine. Whenever this machine is
damaged, repair it before use. Many
accidents are caused by poorly
maintained machines.
Check:
- Screws and nuts loose
- Rubber flaps pipe entry damaged
(replace them if they are worn or
damaged)
- Engine oil level.
- Damaged and/or defective welded parts.
- Defective or damaged wiring.
Make sure that the machine has passed
the adequate maintenance controls. All
damage caused by the use of defective,
worn out or non original parts, annuls the
31
/160
English