Blackstone GBK-700 1L Manual Del Usuario página 58

English
- Insert the filled 0,6 l of oil tube.
- Wait 1 minute for the oil to
completely go
crankcase.
- Clean the dipstick from the oil with a cloth.
- Insert the rod and screw on the oil cap.
- Unscrew the plug again and check
the mark left by oil on the dipstick.
The mark left by the oil must be
between the minimum and maximum
marks.
- If the mark is below the minimum,
add a little more oil and recheck.
- If the mark is above the maximum, you will
have
to remove oil from the crankcase. To
do this, tilt the machine and let out a
little oil (put a container
at the end of the tube to prevent oil
spilling on the machine or the
ground).
6.4.START-UP
6.4.1. CHECKPOINTS BEFORE
COMMISSIONING
The machine must be mounted and
must be used according to the following
instructions:
Before starting the engine, ensure that
the entry chute is completely empty. If
not, clean the entry chute with the use
of a stick or something long.
Maintain hands, other extremities and
clothes clear of the entry hopper, clear of
the exit shoot and clear of all rotating
elements.
Maintain a good balance on
down to the
both feet. Do not lean on the
machine.
Maintain yourself well clear of the exit area
whilst the machine is working.
36
/160