Changing The Engine Oil - Blackstone GBK-700 1L Manual Del Usuario

English
The foam filter can be cleaned in the following
way:
- Remove the protective cap from the filter.
- Remove the filter.
- Clean the filter with soapy water.
- Rinse the filter with clean water.
- Dry the filter.
- Once dry, moisten it with 2 drops of
oil (if you wet the filter with too much
oil the machine cannot start).
- Install the filter on the machine.
- Put on the protective cap.
Note: The engine should never
function without the air filter installed.

8.2.2. CHANGING THE ENGINE OIL

Perform the oil change only while the
engineis still hot.
WARNING! You must not throw old
oil in a pipeline network or on the
Earth. The contamination of
groundwater and water tables is
subject to heavy fines. There are
special collection places at service
stations. If not, any municipal authority
will give you the relevant information.
Note: You have two procedures at your
disposition to empty the engine oil. You
can drain the oil
by loosening the drain screw (Y2)
located at the base of the filling canal
or you can use the engine oil cleaner
(not included with the machine, which
can be found at your nearest dealer)
and suck the oil through the filling tube
(Y1) of the machine. For easy
implementation, cleaning and safety we
recommend that you pick up the oil.
44
/160