Blackstone GBK-700 1L Manual Del Usuario página 64

English
8.1.CARE AND MAINTENANCE AFTER USE
Carry out the following operations when
you have finished the work to ensure that
the machine is kept in a perfect
condition.
8.1.1. CLEANING
Keep the machine clean, especially
the area of the fuel tank and areas
close to the air filter.
8.1.2. CHECKING THE OIL LEVEL
- Place the machine on a horizontal,
uncluttered flat surface.
- Unscrew the oil filler cap.
- Clean the oil cap dipstick with a cloth.
- Insert the dipstick and screw on the oil cap.
- Unscrew the plug again and check the
mark left by the oil on the dipstick. The
mark left by the oil must be between
the minimum and maximum marks.
- If the mark is below the minimum add
a little more oil and recheck.
- If the mark is above the maximum
you will have to remove oil from the
crankcase. To do this, tilt the
machine and let out a little oil (put a
container at the end of the tube to
prevent oil spilling from the machine
or onto the ground).
42
/160