Starting The Engine - Blackstone GBK-700 1L Manual Del Usuario

If the blades hit a strange object (any
other object different to wood) or if the
machine starts to make strange noises
and/or it vibrates in an abnormal way, stop
the engine so that the blades stop turning.
Take the machine to your nearest service
agent for repair.
If the machine gets stuck, you must stop
it and wait for the blades to stop turning.
mandatory.
The machine is designed only for outdoor
use. Avoid using the machine in outdoor
areas with a high probability of exhaust
fumes.
The machine must be used by only one
person at a time.
Never insert your hands in the entry
chute until the machine has been
stopped and the blades have stopped
rotating.
The pieces of wood that might have got
stuck transversally must only be removed
when the machine has been stopped and
the blades have stopped rotating.
ATTENTION: DO NOT INTRODUCE
YOUR HANDS IN THE ROTOR
Never leave the machine unattended or
functioning. Stop the engine and spark
plug before replacing the blades or
counter blades.
After an hours work, check the screws
and nuts are still well tightened. If not so,
tighten them.
The use of
working gloves,
ear protection and
working glasses is
37
/160
The machine should only be repaired by an
authorized after sales dealer.

6.4.2. STARTING THE ENGINE

Before starting engine make sure check
the engine oil and fuel tank before starting
the engine.
Always use original spare parts, if not you
shall lose your warranty.
English
Engine
switch
Emergency
Button