Brooks Instrument DLI Manual De Instalación Y Funcionamiento página 11

Installation and Operation Manual
X-VAP-DLI-Standard-eng
Part Number: 541B203AAG
May, 2016
Figure 1-2 DLIHV Diagram
deliver up to 83 g/min (~5 kg/hr) of water vapor.
The DLIHV circulation heater is constructed of a 316L stainless steel
helical coiled tube cast in an aluminum body with tubular elements. The
aluminum body serves as the heat transfer media between the tubular
heating elements in the center of the heater and the coiled tube through
with the fluid passes. The aluminum casting around the stainless steel
tubing increases the thermal mass ensuring accurate temperature control
of the fluid so as to prevent thermal degradation.
• Wetted Materials: 316L SS (standard); passivation or Titanium (optional)
• Dual K-type thermocouples: one for operating temperature and one for
over-temp limit
• Removable atomizer & exit orifice(s) are sized to the desired operating
conditions
• Silicon insulation jacket
• Powder-coated aluminum cover
• Variety of process connections: tube stub; tube compression; face seal
(1/8" to ½")
Section 1 Introduction
®
Brooks DLI Vaporizer System
1-5