Connection Of The Water Pipe To The Refrigerator - Blomberg IWD 1004 ET Instrucciones De Operación

Water connection to the refrigerator
Please follow the instructions below.
Connection of the Water
Pipe to the Refrigerator
1. After installing the union onto the
water pipe, insert the water pipe to
the refrigerator inlet valve by pressing
downwards firmly.
2. Fix union as seen in the opposite
figure, by squeezing by hand on the
refrigerator inlet valve.
(a- Water Pipe, b-Union, c-Valve)
C
Note 1: You should not need to
tighten the union with a tool to achieve
water tight assembly. In case of a leak
use a spanner or a pair of pliers to
tighten the union.
To fit the water filter follow the
instructions below referring to figures
supplied:
1. Press ice cancel button on the display.
(Figure 1)
2. Remove the filter cover in the fridge
compartment by pulling it forward.
(Figure 2)
15
EN
a
a
b
2
1
c