Trimmer Head; Description - Ducati DBC 4600R Manual De Instrucciones

English
Owner's manual

4.3 Trimmer head

IMPORTANT Always ensure the trimmer cord is wound tightly and evenly around the drum,
otherwise the machine will generate harmful vibration.
Only use the recommended trimmer heads and trimmer cords. These have been tested by the
manufacturer to suit a particular engine size. This is especially important when a fully automatic
trimmer head is used. Only use the recommended cutting attachment.
See the chapter on Technical data.
Smaller machines generally require small trimmer heads and vice versa. This is because when
clearing using a cord the engine must throw out the cord radially from the trimmer head and
overcome the resistance of the grass being cleared. The length of the cord is also important. A
longer cord requires greater engine power than a shorter cord of the same diameter. Make sure
that the cutter on the trimmer guard is intact. This is used to cut the cord to the correct length. To
increase the life of the cord it can be soaked in water for a couple of days. This willmake the line
tougher so that it lasts longer.

5. DESCRIPTION

1 Trimmer head
2 Top protecting cap
3 Gear box
4 Cutting attachment guard
5 Drive shaft tube
6 Clamping cover
7 Handle bar
8 Right handle
36
9 Throttle trigger
10 Engine switch
11 Throttle trigger lock‐out
12 Suspension ring
14 Spark plug
15 Starter handle
16 Fuel tank cap
17 Primer bulb
18 Choke knob
19 Left handle
20 Locking nut
21 Bottom Protecting cap
22 Bottom clamping plate
23 Metal bladeC Metal blade
24 Top clamping plate
25 Harnes