Cleaning And Disinfecting - Orascoptic RDH EliteEdge Instrucciones De Uso Y Cuidado

Precautions
1. Before use, ensure all screws and removable components are secured to the device.
2. DO NOT
• Do not disassemble or modify the device
• Do not spray directly onto the device
• Do not run any part of the device under water or submerge in any liquid or an ultrasonic cleaner
• Do not use an autoclave, chemiclave, glutaraldehyde, iodophor, or any other sterilization method
• Do not use a cleaner with alcohol concentration greater than 70%
• Do not use paper towel to clean the lenses
Transport and Storage
104°F
(+40°C)
-4°F
(-20°C)
10%
Loupe Prescription Service
If your eye prescription changes, you can send your loupe into our optical laboratory to install your
new prescription. When coordinating the return of your loupe, please allow sufficient time for the
installation of your prescription.
Cleaning and Repair Service
Orascoptic offers a loupe cleaning and repair service that is recommended every two years. Optical lab
technicians will clean and disinfect your telescopes and frame and replace worn-out screws, nose pad,
temple tips, side shields, and head strap.
Orascoptic continuously improves its products as a result of customer feedback.
After service, products may reflect improvements in appearance and function.
INSTRUCTIONS FOR USE AND CARE
85% 1.0 atm
(1060 hPa)
0.5 atm
(500 hPa)
Technical Support/Customer Care: 1.800.369.3698 | Outside the U.S. or Canada Call Your Local Distributor
™
Orascoptic Loupes

Cleaning and Disinfecting

Your loupe is a precision optical instrument manufactured from high quality components. With proper
care, it will provide a long and useful life. You must adhere to the following instructions for proper
cleaning and disinfecting, or damage may result.
DO NOT
• Do not spray directly onto the device
• Do not run any part of the device under water or submerge in any liquid or ultrasonic cleaner
• Do not use an autoclave, chemiclave, glutaraldehyde, iodophor, or any other sterilization method
• Do not use a cleaner with alcohol concentration greater than 70%
• Do not use a paper towel to clean the lenses
Cleaning
You may use soap and water, to clean all parts of the device. Dampen or spray a soft cloth and then
wipe the device. Squeeze excess fluid out of the cloth or wipe before using. Use a lens cleaning cloth
with lens cleaning solution to remove any streaks from the lenses. One optical cleaning cloth has been
provided with your purchase. Please call one of our Customer Care Specialists or your authorized
Orascoptic distributor to purchase additional lens cleaning cloths.
Disinfecting
You may disinfect the device with a low-alcohol disinfectant. Apply the disinfectant to a soft cloth and
then wipe the device. Squeeze excess fluid out of the cloth or wipe before using. Use a lens cleaning
cloth with lens cleaning solution to remove any streaks from the lenses. One lens cleaning cloth has
been provided with your purchase. Please call one of our Customer Care Specialists or your authorized
Orascoptic distributor to purchase additional lens cleaning cloths.
Recommended Disinfectants
CaviCide ™ , CaviCide1 ™ , CaviWipes ™ , or CaviWipes1 ™
5