Safety Of Others - Stanley FATMAX FME720 Manual Del Usuario

ENGLISH
Never attempt to stop the machine in motion rapidly by
u
jamming a tool or other means against the blade; serious
accidents can be caused unintentionally in this way.
Before using or fitting any accessory consult the instruc-
u
tion manual. The improper use of an accessory can cause
damage.
Do not use any abrasive discs.
u
Raise the blade from the table insert in the workpiece prior
u
to releasing the on/of switch.
Do not wedge anything against the fan to hold the motor
u
shaft.
The blade guard on your saw will automatically raise when
u
the arm is brought down; it will lower over the blade when
the arm is raised. The guard can be raised by hand when
installing or removing saw blades or for inspection of the
saw. Never raise the blade guard manually unless the
machine is switched off.
Check periodically that the motor air slots are clean and
u
free of chips.
Do not work with material containing asbestos. Asbestos
u
is considered to be carcinogenic.
Never make the warning signs on the power tool unrecog-
u
nisable.
Never stand on the power tool. Serious injuries could
u
occur when the power tool tips over or when coming in
contact with the saw blade.
Do not take hold of the saw blade after working before it
u
has cooled. The saw blade becomes very hot while work-
ing.
Advance the saw blade against the workpiece only when
u
it is switched on. Otherwise, the danger of kick-back exists
when the saw blade catches in the workpiece.
The intended use is described in this instruction manual.
u
The use of any accessory or attachment or performance
of any operation with this tool other than those recom-
mended in this instruction manual may present a risk of
personal injury and/or damage to property.
Never place hands near cutting area. Keep hands outside
u
the "No Hands Zone" which includes entire table and is
labelled by "No Hands" symbols.
To avoid injury from materials being thrown, unplug the
u
saw to avoid accidental starting, and then remove small
materials.
Before use and after any maintenance the blade guard
u
must be checked to ensure proper function. This test must
be performed with the saw switched off and unplugged.
The arm must be raised and lowered to ensure the
guard covers the blade and the blade does not contact
the guard. If the guard fails to operate correctly, have
your power tool serviced by a qualified repair agent.
Call Stanley Fat Max customer services for you nearest
service agent.
8
(Original instructions)
Residual risks.
The following risks are inherent to the use of saws:
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotating/moving parts.
u
Impairment of hearing.
u
Risk of accidents caused by the uncovered parts of the
u
rotating saw blade.
Risk of injury when changing any parts, blades or acces-
u
sories.
Risk of squeezing fingers when opening the guards.
u
Health hazards caused by breathing dust developed when
u
sawing wood, especially oak, beech and MDF.
Injuries caused by prolonged use of a tool. When using
u
any tool for prolonged periods ensure you take regular
breaks.
Additional safety instructions for lasers
This laser complies with class 1M according to IEC 60825-
1:2007. Do not replace a laser diode with a different type. If
the laser is damaged, have the laser repaired by an author-
ised repair agent. Do not use the laser for any purpose other
than projecting laser lines.
Never look into the laser beam directly and intentionally.
u
Do not use optical tools to view the laser beam.
u
Do not set up the tool where the laser beam can cross any
u
person at head height.
Do not let children come near the laser.
u
Warning! Avoid direct eye contact. Laser radiated when laser
guide is turned on. Avoid direct eye contact. Always un-plug
the mitre saw from power source before making any adjust-
ment.
A laser pointer is not a toy and should not come into
u
hands of children. Misuse of this appliance can lead to
irreparable eye injuries.
Any adjustment to increase the laser power is forbidden.
u
Any liability for damages as a result of not following these
safety instructions will be rejected.
When using the laser pointer, do not point the laser beam
u
towards people and/or reflecting surfaces. Even a laser
beam of lower intensity may cause eye damage. There-
fore, do not look directly into the laser beam.
The laser pointer includes no servicing components. Do
u
not open the housing otherwise the guarantee is void.

Safety of others

This appliance is not intended for use by persons (includ-
u
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
ing use of the appliance by a person responsible for their
safety.