Important Instructions - Suncast MDHC200 Instrucciones Para El Armado

Tabla de contenido

Publicidad

Before you begin...
• Read instructions thoroughly prior to assembly.
This kit contains parts that can be damaged if assembled incorrectly or in the wrong sequence.
• Please follow instructions.
Suncast is not responsible for replacing parts lost or damaged due to incorrect assembly.
• Check for all parts before you begin assembly.
Using the provided parts check list on page 5, verify that you have all the parts required to assemble your hose reel.
Caution
• Not intended for use by children.
• This product may become susceptible to impact damage in freezing temperature.
• DO NOT store near excessive heat.
• DO NOT sit or stand on hose reel.

Important instructions

• To help prevent rust, check for any scratches on your hose cart. Apply clear acrylic/weatherproof paint to avoid rusting.
• When attaching the garden hose to the out-tube and/or the leader hose to the in-tube, be sure
to attach correctly. Cross-threading could cause permanent damage.
• Before winding your hose, remove the nozzle or other attachment and drain as much water out of the hose as possible. This will prevent extra
stress on the hose reel (from the weight of the water) that could cause permanent damage.
• To unwind your hose, pull the hose out away from your hose reel in a straight line. To rewind the hose, walk the end back to the hose reel so
the hose is in a "U" shape in front of the reel. This assists in easier rewinding of the hose. If applicable, place your foot ON the right side foot
hold during winding and unwinding to stabilize the unit, and keep hands free from the range of the rotating crank handle.
• When you are finished using your hose reel, turn off the water source. Do not leave water pressure on when not in use.
• Store hose reel indoors during colder months. If hose reel must be left in freezing conditions, disconnect hose from faucet and drain all water
out of hose and reel. Freezing of trapped water may cause damage to reel, hose or pipes.
• Check in-tube and out-tube connections prior to first use each spring. If hose reel starts to leak, tighten all water connections and check washers
in the in-tube and the garden hose. Replace washers, if necessary.
• Once a year, remove the in-tube and clean and re-lube the o-rings. Re-install the in-tube.
Suncast products and replacement parts
To purchase Suncast replacement parts and learn about other Suncast products visit us online or call.
www.suncast.com
24 hours a day, 7 days a week, 365 days a year.
1-800-846-2345 or 1-630-879-2050
2
Correct
Incorrect

Publicidad

Tabla de contenido
loading

Tabla de contenido