Shipment And Packaging; In Case Of Damage - Abicor Binzel MB Serie Instructivo De Servicio

6. Safety warnings
(continuation)
7. Shipment and
packaging
• Work pieces, which have been degreased using chlorinated
solvents, must be thoroughly cleaned before welding starts, to
avoid the risk of phosgene gas forming.
For the same reason, no degreasing baths containing chlorine must be pla-
ced in the vicinity of the welding area.
• Observe fire hazards caused from spatter/drops created during welding.
During welding work remove everything combustible from the working
area.
• During welding work in confined spaces, electrical hazards increase.
Protect yourself accordingly through use of insulating mats, dry clothing
and sufficient ventilation and exhaust.
• Fumes produced when welding, especially lead, cadmium, copper, zinc
and beryllium are harmful!
Use ventilation or an extraction system to ensure that specified MAC values
are not exceeded.
• Place appropriate fire extinguishing equipment in the workplace, within
easy reach.
The components are carefully checked and packaged however damage may
occur during shipping.
Checking procedure on receipt of goods
– Check that the shipment is correct by referring to the shipping note.

In case of damage

– Check the package and components for damage (visual inspection).
In case of complaints
If the package and/or components have been damaged during shipment:
– Get in contact with the last carrier immediately.
– Keep the packaging (for possible checks by the carrier or supplier or for
returning the goods).
Packaging for returning the goods
Use the original packaging and the original packaging material.
If you have questions concerning the packaging and safety during shipment,
please consult the supplier.
Storage in an enclosed space
Ambient temperature
for shipment and storage:
Relative humidity of the air:
- 25 °C to + 55 °C
up to 90 % at a temp. of 20 °C