General; Use; Charging The Battery; Inserting/Replacing The Pumice Attachment - Silvercrest SHN 3.7 A1 Instrucciones De Uso

Quitadurezas eléctrico
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

General

Hard skin (calluses) can form where the skin is exposed to particular stress due
to rubbing and pressure.
If the hard skin becomes too thick, e.g. due to ill-fitting shoes or very dry skin, this
can lead to pain.
If necessary, clarify the cause of excessive callus formation with your doctor.

Use

Charging the battery

1) Connect the mains adapter
2) Place the callus remover on the charger
on the underside of the callus remover are aligned with the contact points of
the charger
3) The green, flashing charge level LED
that charging is in process. Once the appliance is fully charged, the green
charge level LED
NOTE
The appliance needs around 3 hours to fully charge the first time.
When the appliance is fully charged, you can use it for approx. 2 hours.
If the charge level of the integrated battery runs low during operation, the
charge level LED

Inserting/replacing the pumice attachment

NOTE
To order new pumice attachments
department (see section "Service"). Please have the IAN number ready
(see operating manual cover).
To remove a pumice attachment
1) Press the release
pumice attachment
2) You can then pull the pumice attachment
SHN 3.7 A1
of the charger
. Ensure that the contact points
on top of the appliance lights up green.
flashes. Charge the battery as described.
/ :
downwards and, at the same time, pull the side of the
/
next to the release
to a power socket.
so that the two contact points
/
are completely dry.
on top of the appliance indicates
/ , please contact the service
upwards.
/
out of the drive shaft socket
GB │ MT
.
 57

Publicidad

Tabla de contenido
loading

Tabla de contenido