Cleaning And Care - Silvercrest SHN 3.7 A1 Instrucciones De Uso

3) Press the On/Off switch
Press the speed switch
4) Applying light pressure, move the appliance slowly over the hard skin that
you want to remove. Move the appliance in different directions. During
the treatment, do not linger in one particular place. The friction can cause
unpleasant heat.
5) Once you have completed the treatment, push the On/Off switch
6) Remove any skin residue and dust from the pumice attachment
the hand element using the supplied cleaning brush
NOTE
► After the treatment, massage the skin with a skincare cream.

Cleaning and care

RISK OF ELECTRIC SHOCK
► Before cleaning the charger
CAUTION – PROPERTY DAMAGE
► Do not use chemical, aggressive or abrasive cleaning agents. These can
damage the surface of the appliance.
► Never immerse the charger
♦ Clean the appliance, especially the pumice attachments
cleaning brush
♦ Clean the appliance and the pumice attachments
Afterwards, dry the appliance with a clean, dry cloth.
♦ For hygienic reasons, we recommend cleaning the attachments with a clean
cloth or brush moistened with a disinfectant after every use. Afterwards, dry
the appliance with a clean, dry cloth.
♦ Clean the charger
dry cloth. Ensure that the charger
appliance again.
SHN 3.7 A1
. The pumice attachment
to choose between a high and low rotation speed.
, disconnect the mains adapter
or mains adapter
after every use.
with a damp cloth. Afterwards, dry it with a clean,
is completely dry before using the
/ starts to turn.
.
/ and
.
.
in water or other liquids.
/ , with the
/ with a moist cloth.
GB │ MT │
59 ■