Using The Appliance - Silvercrest SHN 3.7 A1 Instrucciones De Uso

To fit a pumice attachment
1) Push the pumice attachment
socket
2) Press the other side of the pumice attachment
the catch

Using the appliance

WARNING – RISK OF INJURY!
► Excessively long or intensive treatment can also injure deeper layers of skin.
Therefore, check the treatment progress and results regularly. Diabetics in
particular are less sensitive on their hands and feet.
NOTE
► The appliance will not be so effective on softened skin. Therefore, do not
carry out any pretreatment in a water bath before using the appliance.
► Stop treatment immediately if it becomes uncomfortable or painful.
1) Select the desired pumice attachment
– coarse pumice attachment
– fine pumice attachment
the skin.
2) Fit the pumice attachment
│ GB │ MT
■ 58
/ (see fig. 1):
/
.
slides correctly into the groove and clicks into place.
Figure 1
(light blue): for mild calluses and to smooth
/
with the drive shaft
/ downwards. Ensure that
/ :
(grey): for particularly thick calluses
as described in the section "Use".
into the drive shaft
SHN 3.7 A1