Residual Risks; Know Your Welder - Würth TIG 200S AC/DC Traducción Del Manual De Instrucciones De Servicio Original

Emergency
Familiarise yourself with the use of this product by
means of this instruction manual. Memorise the
safety directions and follow them to the letter. This
will help to prevent risks and hazards.
1. Always be alert when using this product, so that
you can recognise and handle risks early. Fast
intervention can prevent serious injury and dam­
age to property.
2. Switch off and disconnect from the power sup­
ply if there are malfunctions. Have the product
checked by a qualified professional and repaired,
if necessary, before you operate it again.

Residual risks

Even if you are operating this product in accordance with
all the safety requirements, potential risks of injury and
damage remain. The following dangers can arise in
connection with the structure and design of this product:
1. Damage of the eye's retina resulting from the ultra­
violet radiation of the arc or by sparks.
2. Burns caused by touching the hot workpiece or
electrode.
3. Risk of fire.

Know your welder

Description
TIG 200S AC/DC is a digitization model can be
used for MMA, ACTIG, DCTIG and PULSE TIG, the
parameters can be preset and showed, welding cur­
rent and voltage can real­time display, this is very easy
operation.
1. Front panel
1.1 Know the Front panel
a
b
c
d
e
f
a. Current display
b. AC/DC transfer knob
c. Pulse switch
d. Welding mode knob
e. Parametar knob
f. Adjustment knob
g. Voltage display
h. Status indicator
i. Procedure parameter
j. 2T/4T switch
k. Gas check knob
l. Parametar positive knob
1.2 Current display
To show the preset current when setting and the
welding current when working.
1.3 AC/DC transfer knob
Use this knob to choose the AC or DC, when AC
indicator light, means the machine is under AC
mode. When DC indicator light, means the machine
is under DC mode.
1.4 Pulse switch
Use this knob to choose whether you need the pulse,
when the indicator light, means it is under pulse
mode.
1.5 Welding mode knob
Use this knob to choose the welding mode, can be
used MMA, HF TIG and contact­type TIG
1.6 Parameter knob and positive knob
Use this knob to choose the different procedure.
When selected a procedure, the corresponding indi­
cator light, then use adjustment knob to adjust the
parameter.
1.7 Adjustment knob
Use this knob to adjust the parameter, and the
parameter can be showed on the display.
g
1.8 Gas check knob
h
This machine has the gas check function, use knob to
i
check the gas. Press this knob, the gas check indica­
j
tor light, air valve works, that means the gas circuit
is well working. Press this knob again, the indicator
k
extinguish, gas check function does not work.
l
1.9 Voltage display
To show the preset current when setting and the
welding current when working.
1.10 Procedure parameter display
This part is to show the procedure, when the indi­
cator lights, the corresponding parameter can be
adjusted with the adjustment knob. See following
details:
22