Safety instructions
Read the following safety instructions before starting the machine. Save the User Guide for future reference. Failure to comply
with the safety instructions voids the warranty and may result in personal injury and damage to the product. Dustcontrol is not
responsible for damage to the equipment caused by improper installation or improper operation of the equipment.
Warning
This machine is intended for professional use only.
Only use accessories and replacement parts included in the Dustcontrol product line.
WARNING
Use the machine for its intended purpose. Follow the instructions for the material to be extracted.
WARNING
This machine is only intended for extraction of dry material.
WARNING
When using electrical devices, basic safety instructions must be followed to reduce the risk of fire, electric
shock or personal injury.
WARNING
If incorrect or non-OEM parts are used (especially filters, hoses and plastic bags), the machine can leak
hazardous dust which may result in personal injury.
Environmental protection
Packaging materials can be recycled. Do not dispose of the packaging in household waste. Instead it should be returned for
recycling. Discarded units contain recyclable materials that should be recycled. Batteries, oil and similar items must not get into
the environment. Dispose of scrapped units in an appropriate recycling system.
Discarded units contain recyclable material that should be recycled. Batteries, oil and similar substances must not be released
into the environment. Hand over scrapped units to a suitable recycling system.
Discarded filters contain recyclable material that should be recycled. Transfer used filters to a suitable recycling system.
For more information, please contact your nearest recycling center.
Work area environment
Do not expose the machine to moisture. Do not use it in damp or wet areas or close to flammable liquids or gases.
CAUTION
This machine must only be used and stored in a dry environment.
CAUTION
Do not rinse the machine with water.
Overload
Never let the machine work fully throttled, as this poses a risk of overheating.
DC 5900, Art.nr. 42838-J
15