Troubleshooting Tips - Cafe CES700P Serie Manual De Proprietário

Troubleshooting tips ... Before you schedule service
Save time and money! Review the charts on the following pages first and you may not need to schedule service.
Problem Possible Cause
Surface units do not Pan not positioned correctly.
work properly or
Pan is not in full contact with glass
flashing power setting.
surface.
In some areas, the power (voltage)
may be low.
A fuse in your home may be blown
or the circuit breaker tripped.
Cooktop controls improperly set.
Surface unit setting High cooktop temperature.
changed or turned off
unexpectedly.
Scratches (may appear Incorrect cleaning methods being
as cracks) on cooktop used.
glass surface.
Cookware with rough bottoms being
used or coarse particles (salt or
sand) were between the cookware
and the surface of the cooktop.
Cookware has been slid across the
cooktop surface.
Areas of discoloration Food spillovers not cleaned before
on the cooktop. next use.
Hot surface on a model with a light-
colored cooktop.
Plastic melted to the Hot cooktop came into contact with
surface. plastic placed on the hot cooktop.
Pitting (or indentation) Hot sugar mixture spilled on the
of the cooktop. cooktop.
My new oven doesn't Your new oven has a different
cook like my old one. cooking system from your old oven
Is something wrong and therefore may cook differently
with the temperature than your old oven.
settings?
Food does not bake Oven controls improperly set.
properly.
Rack position is incorrect or rack is
not level.
Incorrect cookware or cookware of
improper size being used.
Oven temperature needs adjustment.
Ingredient substitution.
Food does not broil Oven controls improperly set.
properly.
Improper rack position being used.
Food being cooked in a hot pan.
Cookware not suited for broiling.
The probe is plugged into the outlet
in the oven.
Aluminum foil used on the broiling
pan and grid has not been fitted
properly and slit as recommended.
In some areas the power (voltage)
may be low.
Oven temperature too Oven temperature needs adjustment.
hot or too cold.
49-88078 Rev. 1
What To Do
Center the pan in the cooking zone.
Pan must be flat.
Cover pan with a lid until desired heat is obtained.
Replace the fuse or reset the circuit breaker.
Check to see that the control is set properly. Press On then + or -
Allow the internal fan to cool the cooktop. Check if pan boiled dry.
Scratches are not removable. Tiny scratches will become less visible in
time as a result of cleaning.
To avoid scratches, use the recommended cleaning procedures. Make
sure bottoms of cookware are clean before use, and use cookware with
smooth bottoms.
See the Cleaning the glass cooktop section.
This is normal. The surface may appear discolored when it is hot. This
is temporary and will disappear as the glass cools.
Cleaning the glass cooktop section.
Call a qualified technician for replacement.
For the first few uses, follow your recipe times and temperatures
carefully. If you still think your new oven is too hot or too cold, you
can adjust the temperature yourself to meet your specific cooking
preference. NOTE: This adjustment affects Bake, and Convection Bake
temperatures; it will not affect Broil or Clean.
See the Cooking Modes section.
See the Cooking Modes section and Cooking Guide.
See the Cookware section.
See the Special Features section.
Substituting ingredients can change the recipe outcome.
Make sure you select the appropriate broil mode.
See Cooking Guide for rack location suggestions.
Make sure cookware is cool.
Use a pan specifically designed for broiling.
Unplug and remove the probe from the oven.
If using aluminum foil conform to pan slits.
Preheat the broil element for 10 minutes.
See the Special Features section.
27