5. Use of generator
Continuous operation can not exceed the specified rated power in this manual. Max
power can be loaded for max 5 minutes.
Do not exceed the specified socket current limit.
Do not connect generator to household circuit, otherwise may cause damage to
generator or household appliances.
Do not use a generator for the purpose it can not be achieved, in addition, please
observe the following rules:
•
Do not lengthen the exhaust pipe.
•
If an extension cable is necessary, use a flexible cable with rubber sleeve
(meet the standard of IEC245 or relevant provision)
Extension cable length limit: 60 meters for 2.5mm² cable;100 meters for 4mm²
cable.
Keep the generator away from other cables such as distribution network.
When using AC, DC socket can be used.
If you want to use AC and DC sockets together, the total capacity can not exceed
the sum of AC and DC capacity.
The electrical equipment (including wiring) should not have defect when connecting
to plug.
5.1 Use of AC
1.
Ensure the ouput indicator (green) is on when starting the generator.
2.
Make sure that the switches of connected equipment are turned off, then insert the
equipment plugs into the socket. See figure 11.
Figure 11 Equipment connects to generator
11