Charging Time - Sony Handycam DCR-SR20 Guía De Operaciónes


Notes
You cannot attach any "InfoLITHIUM" battery pack other than the V series to your camcorder.

1
Turn off your camcorder by closing the LCD screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
Align the  mark on the DC plug with that on the DC IN jack.

The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
4
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
Tips

See page 60 on recording and playing time.

When your camcorder is on, you can check the approximate amount of remaining battery power with the

remaining battery indicator at the upper left on the LCD screen.

Charging time

Approximate time (min.) required when you fully charge a fully discharged battery pack.
Battery pack
NP-FV30 (supplied)
NP-FV50
NP-FV70
NP-FV100
Times measured with the camcorder at 25

C to 30 C (50 °F to 86 °F) is recommended.
10
 
US
1
Charging time
115
155
195
390
C (77 °F).
