Intended Use; Product Features; Technical Data; Product Description And Specifications - Bosch 0 607 459 203 Manual Original

OBJ_BUCH-1578-004.book Page 15 Monday, October 10, 2016 1:03 PM
Symbols
The following symbols could have a meaning for the use of your
pneumatic tool. Please take note of the symbols and their mean-
ing. The correct interpretation of the symbols will help you to
use the pneumatic tool in a better and safer manner.
Symbol Meaning
 Before installing, operating, re-
pairing, maintaining and replacing
accessories as well as prior to
working near by the pneumatic
tool, please read and observe all in-
structions. Failure to follow the fol-
lowing safety warnings and instruc-
tions may result in serious injury.
W Watt
Nm Newton metre
kg Kilogram
lbs Pounds
mm Millimetre
min Minutes
s Seconds
Revolutions or motions per
-1
min
minute
bar bar
psi pounds per square inch
l/s Litres per second
cfm cubic feet/minute
dB Decibel
QC Quick-change chuck
Symbol for hexagon socket

Symbol for external drive
US fine thread
UNF (Unified National Fine
Thread Series)
G Whitworth thread
NPT National pipe thread
Right rotation
Left rotation
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the fold-out
page with the illustration of the pneumatic tool and leave it
open.
Bosch Power Tools

Intended Use

The pneumatic tool is intended for driving in and loosening
screws as well as for tightening and loosening nuts within the
given dimension and power range.

Product Features

The numbering of the product features refers to the illustra-
tions on the graphics pages.
1 Tool holder
2 Lock nut
3 Housing sleeve
4 Utility clip
5 On/Off switch (lever)
6 Screw-suction bolt
Power output
7 Connection socket at air intake
Unit of energy
8 Air outlet with silencer
(torque)
9 Rotational direction switch
10 Union nut
Mass, weight
11 Hose fitting
Length
12 Hose clamp
Time period,
13 Supply-air hose
duration
14 Guide sleeve
No-load speed 15 Recoil spring of the guide sleeve*
16 Screwdriver bit with tapered flute for air passage*
Air pressure
17 Clutch
18 Hex key (5 mm)
Air consumption
19 Hexagon nut
20 Notched disc
Unit of relative
21 Clutch spring
loudness
22 Clutch sleeve
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
Tool holder can be found in our accessories program.

Technical Data

These pneumatic tools belong to the CLEAN product line.
Through its oil-free operation and reduced air and energy con-
Connecting thread
sumption, Bosch's CLEAN technology is operator-ergonomic
and helps save the environment.
Operation with air containing oil is also possible.
Rotational direction
consumption optimized – C
lubrication-free
ergonomic
air tool
noise reduction
English | 15
– L
– E
– A
– N
1 609 92A 37J | (10.10.16)