5. Installation and operation
5.1 Instructions for the installer
CAUTION!
The installation and maintenance work related to the device may be performed
only by the qualified and authorized technician, in accordance with international,
national and location regulations.
5.1.1 Installation instructions
•
Before the installation and the use of the device, read carefully these operating
instructions.
•
Any operation related to installation, assembly, operation and maintenance must be
performed by the specialized personnel who has appropriate qualifications
(manufacturer' or seller's authorisation). The required activities need to be
performed while taking into account the installation regulations valid in a
given country as well as the product safety legislation and health and safety
regulations.
•
Defective installation, mistakes during the operation, conservation and cleaning, as
well as possible changes and modifications may cause improper operation, damages
and injuries.
•
Manufacturer will not assume any liability for personal injuries or material damages
resulting from the failure to observe the aforementioned regulations or tampering
with single components of the device or using non-original spare parts.
•
Make sure that there are no obstacles on the path to the installation site limiting
access through doors, corridors or other communication routes.
•
NOTE: During the transport of the device, it may turn over, which might result in the
damage to the device itself or other objects or in personal injuries. During the
device's transport, use the measures appropriate for its weight. The device should
not be pulled or tipped, but lifted perpendicularly to the floor and moved horizontally.
- 35 -