General Safety Notes; Notes On Ul Approval; Intended Use - SICK HTB18 D02 Serie Instrucciones De Uso

1

General safety notes

2

Notes on UL approval

3

Intended use

8017850.1A15 / 2020-12-14 | SICK
Subject to change without notice
Read the operating instructions before commissioning.
■
■
Connection, mounting, and configuration may only be performed by trained
specialists.
■
NO
2006/42/EC
Not a safety component in accordance with the EU Machinery Directive.
SAFETY
■
When commissioning, protect the device from moisture and contamination.
These operating instructions contain information required during the life cycle of
■
the sensor.
HTB18L:
LASERCLASS 1
Laser
1
EN/IEC 60825-1:2014
IEC60825-1:2007
Maximum pulse power < 4,0 mW
Puls length: 4 µs
Wavelength: 650 - 670 nm
Complies with 21 CFR 1040.10
and 1040.11 except for deviations
pursuant to Laser Notice No. 50,
dated June 24, 2007
ATTENTION
WARNING: Interruption, manipulation or incorrect use can lead to hazardous exposure
due to laser radiation.
All housing types are Type 1 enclosure.
The HTB18L is an opto-electronic photoelectric background suppression proximity sen‐
sor (referred to as "sensor" in the following) for the optical, non-contact detection
of objects. If the product is used for any other purpose or modified in any way, any
warranty claim against SICK AG shall become void.
The sensor complies with the Radio Safety Requirements (EMC) for the industrial sector
(Radio Safety Class A). It may cause radio interference if used in a residential area.
GENERAL SAFETY NOTES
1
5