Before First Use; Boiling The Water - Oursson EK1742G Manual De Instrucciones

The kettle is equipped with protection from
switch-on without water. If you turn on the
kettle with no water or a little water, the
device will turn off after a few seconds. Af-
ter cooling the heating element, the kettle
will get back to working condition. Clicking
sounds made by the kettle, indicate the reset
of thermostat.
To accelerate the cooling of the heating ele-
ment, do not fill kettle with cold water. This
may damage the heating element.
Kettle is designed only for heating clean drinking water.

BEFORE FIRST USE:

• Wash the inner surface of your new kettle with the
use of non-abrasive cleaners. Dry the kettle. Wipe
the kettle with a clean dry cloth.
• Boil the maximum amount of water in a safe manner
as described in the previous section. Monitor for no
leaks, sparks, melting of body, stand, excessive heat-
ing of the power cord, plug, and burning smell during
first two boiling.
• Boiled water from the first two boiling is not recommend-
ed to use in food. You can use it for everyday needs.
OPERATION ORDER:

Boiling the water:

1. Remove the kettle from the base, open the lid (Pic.
C-2), and fill it with water.
PRODUCT CERTIFICATION
For information on product certification, see http://www.oursson.com or ask seller for a copy.
Specifications
Model
Power consumption, W
Rated voltage
Level of protection
Storage and transportation temperature
Operating temperature
Humidity requirements
Dimensions, mm
Weight, kg
Body material
Swivel base
Protection against switching on without water
Controller
Auto / manual shutdown mode
Power indicator light
Water level indication
Volume, L
Products should be stored in dry, ventilated warehouses at temperatures below
*
Reparation must be performed only by a qualified personnel authorized by OURSSON AG service center.
2. Install the kettle cover to would fall into the bore with a
protrusion, and the cover will fit snugly onto the kettle.
Place the kettle on a stand. Insert the plug into an outlet.
3. Push button down. Water will heat up.
5
4. After boiling the water, the kettle will automatically turn off.
Turning off the kettle
There are two ways of turning off the kettle:
• Push button up, when the device is working;
5
• When the kettle is working, remove it from the stand.
CLEANING AND MAINTENANCE, Рiс. D
Hard water can leave scale in the kettle. Use special
cleaners for descaling. Follow the instructions of the used
detergent. Do not use abrasive or harsh cleaners.
• Fill the kettle halfway with water.
• For every 2 cups of water, add 6 tablespoons of white
vinegar 8%.
• Bring to a boil.
• Repeat the procedure if necessary.
• Unplug it.
• Allow the kettle to cool and rinse it twice with cold water.
• Wipe the outside of the kettle with a clean, soft,
damp cloth. In order to prevent electrical shock
do not immerse the entire product or the wires
into the water.
Thoroughly dry all the parts of the device.
While utilizing the kettle, the heating element
can change the color, but that will not affect
the kettle's work.
EK1742G
max 1800
220-240V~; 50-60 Hz
I
from -25°C to +35°C
from +5°C to +35°C
15-75%
256x159x192
1,62
Ceramic
360 °C
yes
Strix
Stainless steel
yes
max
1
- 25°С.
9